⇩ Entrance Guard Systems-HD ⇩

Overview & License Tag Capture System Cameras with WiFi Recorder Access

Outdoor IP System for Documenting Vehicular Traffic Entering/Exiting Subdivisions, Remote Sites, Gated Entries, Lots, and other Non-Manned Sites.

Pre-Built Factory Kits on Pole(s) – We pre-build and wire all cameras and the Outdoor NVR System on a pole or poles. All wires are hidden and protected. These poles are very easy to install as they are designed to be buried in a 3′ deep hole (just add concrete). A Power Junction box is supplied at ground level.

 (NOTE: All pre-built systems come standard built on a 9 foot (5-inch square) white or Dark Bronze pole (6 feet above the ground and 3 feet buried). Strong Poles make these poles. If you need a higher pole, add $39 per foot.)

Dual Lane/Entry or Gate System 1 Pole

 (Part# EGSPB-1B)

RuggedVision-5 GenII – 8 Channel Outdoor IP Network Video Recorder 

with two cameras, one overview N-Range camera, and one TagShot-IP License Plate Capture Camera – all pre-built on a 9 foot (5-inch square) buriable pole.

The RV5 is an outdoor eight channel NVR with TP-Link WiFi and plug-n-play. 

The 2-N-Range bullet camera is a 2.8-12mm Lens 2 Megapixel (1080p).

The 2-TagShot-IP bullet camera is a 5 x 850nM SR-LEDs & 25 x 850nM IR LEDs [B/W Images]. 

For more information on the subdivision license tag capture systems, contact one of our Design Engineers toll-free at 866-264-0041 or stop by our website envirocams.com.